Communicate with Supplier? Supplier
Maggie Ms. Maggie
What can I do for you?
Contact Supplier

JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD

Rear Muffler - manufacturer, factory, supplier from China

(Total 24 Products for Rear Muffler)

  • 3" V Band Sedan Exhaust System

    3" V Band Sedan Exhaust System

    • Brand: N/A

    • Packaging: Cartons On Pallets

    • Supply Ability: 4000PCS/Year

    • Min. Order: 50 Piece/Pieces

    3 V Band Sedan Exhaust System 3 High Performance Sedan Exhaust System Stainless Steel 304 With Mirror Polishing This Exhaust System Is Made Of SS304 By Using Tig Welding The Muffler Body Is Packed With High Quality Exhaust Fiber Glass Wool The Flanges Are Laser Cuting The Jigs Are Made Against The Original Exhaust...

    Contact Now

  • Golf V Exhaust System Performance

    Golf V Exhaust System Performance

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Cartons

    • Supply Ability: 10000PCS/Year

    • Min. Order: 50 Set/Sets

    Golf V Exhaust System Big Power Golf V Exhaust System We Can Make This Kind Of Exhaust System With SS304 And SS409 Wtih Mirror Polishing This Kind Of System Was Welded By Tig Welding Or Mig Welding The Exhaust Pipe Was Made By Mandrel Bending Machine So It Is More Smooth To Let The Gas Flow Out This Exhaust System Was...

    Contact Now

  • Holden Commodore  VE Sedan Wagon JET

    Holden Commodore VE Sedan Wagon JET

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Set/Sets

    Holden Commodore VE Sedan Wagon JET The Whole Holden Commodore VE Sedan Wagon JET Was Made Of Stainless Steel 304 With Polishing The System Has Front Pipe And Middle Muffler And Middle Pipe And Rear Mufflers Each Part Was Connected Together By Bolts On Flanges Between The Flanges We Use Gasket To Avoid The Glass Flow...

    Contact Now

  • Volkswagen Bora 1.8T Exhaust System

    Volkswagen Bora 1.8T Exhaust System

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Set/Sets

    Volkswagen Bora 1 8T Exhaust System We Developed This System According To The Original System So The Fitment Is 100 Correct The Muffler Was Packed WIth Fiber Glass Wool Then Welded Together By Tig Welding The Flanges Are Laser Cutting The Middle Hotdog Size Is 3 5 The Rear Muffler Size Is 8 x 6 Welded With Double 3 5...

    Contact Now

  • Legacy GT 2.5L Exhaust System

    Legacy GT 2.5L Exhaust System

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Set/Sets

    Legacy GT 2 5L Exhaust System This Dual Legacy Exhaust Sysem Is Made Of Stainless Steel 304 With Polishing The Muffler Body Is Full Filled With High Quality Fiber Glass Wool The Muffer Is Developed As The Original Car So The Fitment Is 100 Correct The Hotdog In The Middle Is 3 Diameter The Rear Muffler Body Size Is 10...

    Contact Now

  • Nissan 350Z Catback Exhaust

    Nissan 350Z Catback Exhaust

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Set/Sets

    Nissan 350Z Catback Exhaust Nissan 305Z Exhaust System Is Made Of SS304 With Polishing The Muffler Is Packed With High Temperature Fiber Glass Wool The Brackets And Flanges Are Welded On The Muffler By Tig Welding It Is Warm Welcomed In Autralia Market The Middle Hotdog Size Is 3 The Rear Muffler Body Size Is 6 Round...

    Contact Now

  • Nissan 300ZX Catback Exhaust

    Nissan 300ZX Catback Exhaust

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Set/Sets

    Nissan 300ZX Catback Exhaust This Kind Of Exhaust System Is Welded Hotdogs And Mufflers Together By Tig Welding The Flange Is Laser Cutting The Jigs Is Made By CNC Center So The Fitment Is 100 Correct The Dual Middle Hotdogs Are 4 Diameter The Rear Mufflers Are 8 x 6 Oval Size The Tips are 4 We Jining Far East Liang...

    Contact Now

  • 7.75" Oval Muffler With Tips

    7.75" Oval Muffler With Tips

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Bag/Bags

    7 75 Oval Muffler With Tips A performance car is an automobile that is designed and constructed specifically for speed The design and construction of a performance car involves not only providing a capable power train but also providing the handling and braking systems to support it Performance cars are road vehicles...

    Contact Now

  • Round Universal Exhaust Muffler

    Round Universal Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 40000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Round Universal Exhaust Muffler This Kind Of Round Aluminized Muffler Is Seam Locking Style This Muffler Body Use 2 Layers 0 6mm Thickness Aluminized Steel By Seam Locking Machine The Perf Tube Is Straight Flow It Packed With High Quality Fiber Glass Wool It Can Stand High Temperature the Sound Is Great This Kind Of...

    Contact Now

  • Stainless 8.5" Oval Exhaust Muffler

    Stainless 8.5" Oval Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    8 5 x4 625 Exhaust Muffler Exhaust Muffler We Have Toolings For All Kinds Of Oval Exhaust Mufflers This Kind Of Muffler Is Made Of Stainless Steel 304 Packed With High Temperature Fiber Glass This Kind Of Muffler Is Welded By Tig Welding And Polished By Hand This Kind Of Muffler Sells All Over The World The Muffler...

    Contact Now

  • 2.25" Stainless Steel Loop Muffler

    2.25" Stainless Steel Loop Muffler

    • Brand: N/A

    • Packaging: Cartons on Pallets

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    2 25 Stainless Steel Loop Muffler High Performance Stainless Steel Loop Muffler with Mirror Polishing Our all Welded Muffler 4x9 1 2 in by 19 overall length13 in body 2 1 2 in inlet 2 1 2 in OutletOffset center The Muffler Body Welded With Bigger Size Tip On it We Jining Far East Liang Fei Converter Muffler Co LTD are...

    Contact Now

  • SCM5003 After Market Muffler Replacement

    SCM5003 After Market Muffler Replacement

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    SCM5003 After Market Muffler Replacement Cat back also cat back and catback refers to the portion of the exhaust system from the outlet of the catalytic converter to the final vent to open air This generally includes the pipe from the converter to the muffler the muffler and the final length of pipe to open air Cat...

    Contact Now

  • STR257 Flange Exhaust Muffler

    STR257 Flange Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR257 Flange Exhaust Muffler An exhaust system is usually piping used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove The entire system conveys burnt gases from the engine and

    Contact Now

  • SCM5001 Exhaust System Muffler

    SCM5001 Exhaust System Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    SCM5001 Exhaust Muffler The gases from most types of machines are very hot the pipe must be heat resistant and it must not pass through or near anything that can burn or can be damaged by heat A chimney serves as an exhaust pipe in a stationary structure For the internal combustion engine it is important to have the...

    Contact Now

  • STR251 Ford Exhaust Muffler

    STR251 Ford Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR250 Original Exhaust Muffler An unavoidable side effect of this noise reduction is restriction of the exhaust gas flow which creates back pressure which decreases engine efficiency This is because the engine exhaust must share the same complex exit pathway built inside the muffler as the sound pressure that the...

    Contact Now

  • STR256 Exhaust System Muffler

    STR256 Exhaust System Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR256 Exhaust System Muffler Some aftermarket mufflers claim to increase engine output and or reduce fuel consumption by dint of reduced back pressure This usually entails less noise reduction The legality of altering a motor vehicle s original equipment exhaust system varies by

    Contact Now

  • STR250 Original Exhaust Muffler

    STR250 Original Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR250 Original Exhaust Muffler Mufflers are installed within the exhaust system of most internal combustion engines The muffler is engineered as an acoustic device to reduce the loudness of the sound

    Contact Now

  • 7.5" Round Stainless Steel Muffler

    7.5" Round Stainless Steel Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Cartons

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    7 5 Round Stainless Steel Muffler Straight Flow Exhaust Muffler with Mirror Polishing The Muffler Body Is Made Of Stainless Steel 304 The Perf Style Is Straight Flow So the Sound is Lounder And High Speed This Kind Of Muffler Can Be Used On Sport Cars Also We Can Print Customer Need Logo By Laser Print Machine The...

    Contact Now

  • 4" Double Muffler With Tips

    4" Double Muffler With Tips

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Bag/Bags

    4 Double Muffler With Tips Double Stainless Steel Exhaust Muffler With Mirror Polishing We Can Make This Kind Of Muffler With Tig Welding Or Mig Welding This Muffler Is Packed With High Temperature Fiber Glass Wool This Kind Of Muffler Is Warm Welcome to US Market and Australia Market The Muffler Body Is Double 4...

    Contact Now

  • Oval Muffler With Spoggits

    Oval Muffler With Spoggits

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 40000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Oval Muffler With Spoggits This Kind Of Oval Muffler Is Seam Locking Style This Muffler Use 2 Layers 0 6mm Thickness Aluminized Steel By Rooling Machine It Packed With High Quality Fiber Glass Wool The Gas Go Through Directly So the Sound Is Great This Kind Of Universal Muffler Is Warm Welcomed In Australia Market The...

    Contact Now

  • 4.5" Universal Exhaust Muffler

    4.5" Universal Exhaust Muffler

    • Brand: N/A

    • Packaging: Cartons Packed On Pallets

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    4 5 Stainless Steel Exhuast Muffler High Performance Stainless Steel Round Muffler with Mirror Polishing This Muffler Is Warm Welcome In Australia Market It Is The Best Quality and Most Competitive Price The Muffler Body Size Is 5 Round The Inlet Size Is 3 With 50mm Long The Out Let Size Is 4 Diameter The Tip Length...

    Contact Now

  • 5.5" Round Universal Muffler

    5.5" Round Universal Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    5 5 Round Universal Muffler High Performance Universal Muffler With Exhuast Tip The Tip Was Welded On The Muffler By Tig Welding The Muffler Body Was Polished Like Mirror The Muffler Was Packed With Hihg Quality Fiber Glass Wool The Perf Is Straight One So It Can Provide High Power The Muffler Body Size Is 5 5 Round...

    Contact Now

  • 8.5"x5" Oval Exhaust Muffler

    8.5"x5" Oval Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    8 5 x5 Oval Exhaust Muffler This Kind Of Muffler Was Aluminium Muffler Body The Muffler Was Packed With High Quality Fiber Glass Wool The Tip Was Welded On The Muffler Body by Tig Welding So The Muffler Looks Great The Muffler Body Is 8 5 X 5 Oval Size The Inlet Size Is 3 Diameter The Spoggit Lenght Is 100mm The Tip...

    Contact Now

  • Heavy Duty Exhaust Muffler

    Heavy Duty Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Heavy Duty Exhaust Muffler Round Muffler Body Was Mirror Polishing The Muffler Body Was Packed With Fiber Glass Wool The Muffler Is Straight Flow Style So It Can Provide Big Power The Muffler Body Size Is 8 Round Diameter The Inlet Size Is 3 5 The Spoggit Length Is 100m The Tip Is 4 Diamter Round and 200mm Long Welded...

    Contact Now

Review

Idrees Ibrahim Adam

Sep 26, 2019 4

Everything is good.I can complain nothing about it.
Mr.kitttipoom

Sep 15, 2019 5

The second purchase will be soon. Good price of Rear Muffler .
Mr.buddhi Weerasekera

Sep 11, 2019 5

The manufacturer is a conscientious one. Highly recommend JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD company!
We are seeking for Rear Muffler , Car Muffler , car muffler , and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation.
Adhering into the principle of "quality, provider, performance and growth", we now have gained trusts and praises from domestic and intercontinental consumer for Rear Muffler , Car Muffler , car muffler , Many years of work experience now we have realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally suppliers can be reluctant to question points they do not understand. We break down those barriers to ensure you get what you want to the level you expect when you want it. faster delivery time and the product you want is our Criterion .

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

Maggie

Ms. Maggie

Email:

sales@fareast-liangfei.com

Send Inquiry

Tel:86-537-3152888

Fax:86-537-3152887

Mobile Phone:+8613964922486

Email:sales@fareast-liangfei.com

Address:#35 JINYU ROAD HIGH-TECH DISTRICT JINING,SHANDONG , Jining, Shandong

Mobile Site

http://www.liangfeiexhaust.com